Electronics & Programming

develissimo

Open Source electronics development and programming

  • You are not logged in.
  • Root
  • » MSPGCC
  • » [Mspgcc-users] Remote failure reply: E00 and other errors, Dear friends of mspgcc [RSS Feed]

#1 March 22, 2008 15:17:54

m.
Registered: 2009-11-02
Reputation: +  0  -
Profile   Send e-mail  

[Mspgcc-users] Remote failure reply: E00 and other errors, Dear friends of mspgcc


Dear mspgcc users and friends,

i do TRY to work now with the mspgcc toolchain for about 3/4 of a year.
but i am still at the beginning.

not problem is, PROBLEMS are:

i have to try very often until i manage to get a connection to my
msp430-169stk from olimex.
very often i get the answers: fusion blown
device unknown
device not present
well you know that stuff.

but every 2 up to 10 times i try to connect using the msp430gdb-proxy
it can do it!

WELL so i am connectd (i configured eclipse to manage the
msp430gdb-proxy for me)

now i use the msp430-gdb in the console with the following commands:

msp430-gdb blinkled.elf

(gdb)target remote localhost:2000
msp430-gdbproxy tells me connected! GOOD !!! ;-)

but now msp430-gdb fails. always in a different way.

sometimes i can
(gdb)list
sometimes i can
(gdb)info registers
sometimes i can set a breakpoint
(gdb)break 13 //13 is just an example

but i NEVER can
(gdb)c //c for continue
i always get errors like
Continuing.
warning: Remote failure reply: E00

i can see errors on the output of msp430-gdbproxy which tells me very
often things like
debug: MSP430_Memory(READ)
error: msp430: Could not read device memory (6)
debug: MSP430_Memory(READ)
error: msp430: Could not read device memory (6)

or after starten continue with c
debug: MSP430_Run()
error: msp430: Could not run device (to breakpoint) (17)

please help me, i really would like to work with this things.
Is this possible or should i give up on mspgcc?

i really investigated months in this.

So here it comes: Running msp430-gdbproxy latest version, msp430-gdb
gdb6.0 on Linux / Ubuntu.

Please help me, Thanks a lot!!!
>Raphael

Offline

#2 March 23, 2008 22:32:19

Ulrich W.
Registered: 2009-11-02
Reputation: +  0  -
Profile   Send e-mail  

[Mspgcc-users] Remote failure reply: E00 and other errors, Dear friends of mspgcc


Hello Raphael,

I also had those " Remote failure reply: E00" errors. This seems to be caused
by electrical interference. What helped me a lot, was to use an usb cable in
order to get the ez430 stick away from my notebook in order to reduce
electrical interference. I also get those problems when I debug my Circuits
while they are driving some Motors.

hth

Ulrich

----- Ursprüngliche Mail ----
Von: msp430 <microcontrollerfr***@*mx.at>
An: mspgcc-us***@*ists.sourceforge.net
Gesendet: Samstag, den 22. März 2008, 15:17:42 Uhr
Betreff: Remote failure reply: E00 and other errors, Dear
friends of mspgcc

Dear mspgcc users and friends,

i do TRY to work now with the mspgcc toolchain for about 3/4 of a year.
but i am still at the beginning.

not problem is, PROBLEMS are:

i have to try very often until i manage to get a connection to my
msp430-169stk from olimex.
very often i get the answers: fusion blown
device unknown
device not present
well you know that stuff.

but every 2 up to 10 times i try to connect using the msp430gdb-proxy
it can do it!

WELL so i am connectd (i configured eclipse to manage the
msp430gdb-proxy for me)

now i use the msp430-gdb in the console with the following commands:

msp430-gdb blinkled.elf

(gdb)target remote localhost:2000
msp430-gdbproxy tells me connected! GOOD !!! ;-)

but now msp430-gdb fails. always in a different way.

sometimes i can
(gdb)list
sometimes i can
(gdb)info registers
sometimes i can set a breakpoint
(gdb)break 13 //13 is just an example

but i NEVER can
(gdb)c //c for continue
i always get errors like
Continuing.
warning: Remote failure reply: E00

i can see errors on the output of msp430-gdbproxy which tells me very
often things like
debug: MSP430_Memory(READ)
error: msp430: Could not read device memory (6)
debug: MSP430_Memory(READ)
error: msp430: Could not read device memory (6)

or after starten continue with c
debug: MSP430_Run()
error: msp430: Could not run device (to breakpoint) (17)

please help me, i really would like to work with this things.
Is this possible or should i give up on mspgcc?

i really investigated months in this.

So here it comes: Running msp430-gdbproxy latest version, msp430-gdb
gdb6.0 on Linux / Ubuntu.

Please help me, Thanks a lot!!!
>Raphael



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_______________________________________________
Mspgcc-users mailing list
Mspgcc-us***@*ists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/mspgcc-usersLesen Sie Ihre E-Mails jetzt einfach von unterwegs.
www.yahoo.de/go

Offline

  • Root
  • » MSPGCC
  • » [Mspgcc-users] Remote failure reply: E00 and other errors, Dear friends of mspgcc [RSS Feed]

Board footer

Moderator control

Enjoy the 16th of December
PoweredBy

The Forums are managed by develissimo stuff members, if you find any issues or misplaced content please help us to fix it. Thank you! Tell us via Contact Options
Leave a Message
Welcome to Develissimo Live Support